Creative Writing Essay

He didn’t look anything like I’d expected. That was when I realised something was wrong. Bad thoughts were rushing through my head at a million miles an hour. I could hear and see nothing for miles except for his dark outline. Confusion and worry was all I could think and I could feel myself shaking. The footsteps were getting louder so I slowly backed away, trying not to make it obvious. Why had I agreed to this, it had been spur of the moment when I’d been upset over that stupid boy from math class. I should have known better than to be so stupid. Then he realised what was happening ‘Sweetie it’s fine. Don’t move I’ll look after you.’ his voice was deep but somehow reassuring. For a second it calmed me down. He sounded so nice, had I jumped to conclusions? Maybe he was just worried about the age gap. I started to walk towards him and he got a beer out of his bag. ‘Have some of this darling.’ He offered it to me but that was one thing I knew to reject. I wasn’t going to be even stupider and drink alcohol in this situation. He turned towards the car and signaled for me to follow. Slowly I trailed behind with my feet scuffling along the floor as I considered my options. I was scared but I didn’t want to believe he would be horrible after how well we had got on before we had met. So I followed him along the path towards what I supposed was his car at the end of the street. I felt in my pocket, my phone was there safely, it would all be fine. I can look after myself I remember thinking. If only I had known. When I reached the car we both got in, with not a word uttered from either of us. He started the car and I plucked up the courage to ask where we were going. ‘Wouldn’t you like to know’ he laughed. He revved the car and off we went through the streets. My heart started to beat faster and faster, it was out of control. I started to shake. My conscience kicked in. Stop Amber, Take control. ‘Please I don’t think this is a good idea, I want to go home’ I stuttered quietly. He laughed in my face. ‘Please, Please.’ I shouted louder but he wasn’t listening. We carried on driving. I noticed where we were driving to; it was towards the abandoned warehouse on the edge of town. I was angry with myself especially for agreeing to meet in the middle of no where, that should have been the first sign of something not being right. Who would have wanted to meet there unless they weren’t who they said they were. What shall I do? How do I get out of here? So many thoughts were swirling round my head. Then the car stopped. He started to get closer, his hand was moving down my thigh and his face was getting closer and closer to mine. I tried to move away but I could feel his warm breath on my face. He had his hand clenched tightly onto my arm so I couldn’t move. I kicked and he grabbed me even harder. I could feel his sweaty hand moving up my skirt and under my tights. I couldn’t talk, I was frozen with fear. Then I don’t know what came over me but suddenly I wasn’t scared anymore. I spat as hard as I could in his face. His shock made him pull back, this was my chance to get out. I hit him as hard as my arms would let me, moved back and then kicked him in the face. I saw his hand move towards the lock button on the car. As quick as I could I pushed the door open and fell to the street floor. Grabbing my bag I got up and ran as fast as my legs could go. I could hear shouting and screaming from behind but I daren’t look back. He was running after me, I could hear his feet pounding against the street floor. I felt a hand grab my shoulder and push me against the floor. ‘I think she’s waking up’ I heard people whispering around me. Slowly I opened my eyes and above me I could see what seemed to be a doctor and a man dressed in a suit. ‘Amber, are you okay? Do you remember what happened the other day?’ The other day? Last thing I remember was lying on the street floor looking into those dark brown eyes. Then I looked to the side and I could faintly make out the body of a man asleep on a bed next to me. As they saw me look over they started to draw the curtain around him but not before I saw them. Handcuffs locking him to the bed. It was him.

Booker T. Washington VS. WEB DuBois Essay

Booker T. Washington VS. WEB DuBois In the days when segregation was not uncommon, there were two men that played a huge part in the fight for equality in the United States. Booker T. Washington and WEB DuBois were great leaders, who supporterted civil rights, yet also disagreed on various issues related to reconstruction, poverty, racism, and discrimination. Both Washington and DuBois worked on reforming education as well as eliminating discrimination towards Blacks, but their strategies of achieving said change varied greatly. The first leader that came along was Booker T. Washington. He believed that african americans would not make it any where in society if they focused on just equality. He told blacks to target education, trade, and financial progress in order to get an economic foothold in society as well as becoming better individuals. Washington felt that blacks could not be a in a position to improve their standing in communities until they withdrew from poverty and evolved into something that could not be denied as equals. It was understood that blacks would never be completely equal to whites and that there would always be some form of segregation and discrimination. Instead of fighting with it,Washington encouraged blacks to accept it, embrace it, and work around it. The next main leader was WEB DuBois. Contrary to Washingtons beliefs, DuBois deemed that blacks should be like whites, in the aspect of having an organized education and the same political rights. DuBois felt that blacks should not approach this indirectly like Washington, but face it head on and demand the rights that they considered to be theirs. He took the more assertive stance that african a mericans should press for full equality and use agitating, passive-aggressive tactics in hopes that the whites would reluctantly comply. In the â€Å"Declaration of the Principles of the Niagara Movement† he and other Black intellectuals outlined a list of demands in which they desired to meet the needs and interests of all African Americans. Dubois asserted that economic security was not nearly enough and blacks should become just as educated as the whites. Mainly he considered Booker T. Washington’s ideas and took them a step further, if not more. At the time, the most reasonable leader would be none other than Booker T. Washington. His understanding that blacks would never be equal and that not being his main focus, gave him the upperhand on WEB Dubois. Du Bois urged blacks to attempt to uplift themselves through educational advancement and  political rights. Although his ideas had potential, Washington’s gradualism stance gives him wide spread appeal among both blacks and whites. In today’s day and age, there are people who are still racist and don’t accept blacks because of their color/culture, but todays blacks understand that and tolerate it. In conclusion, the rivalry between Booker T. Washington and W.E.B DuBois is one well known to scholars and historians of the United States. Washington and Dubois were two great segregation leaders who offered different strategies for dealing with the problems of poverty and discrimination facing Black Americans. They both brought enthralling ideas to the table and in short, Booker T. Washington believed in civil rights through evolution whereas WEB DuBois demanded more immediate black equality.

Case study # An Invisible Superintendent Example | Topics and Well Written Essays - 500 words

# An Invisible Superintendent - Case Study Example However, considering the busy schedule of the superintendent, Dr. Myer could have sought alternative options of communications. For instance provide written a submission of her proposal. The conduct of the superintendent may not be voluntary. Since acquiring his job, he has been provided with numerous tasks that may require more time that he has to attend to all his duties. For instance, he was appointed to the board of a local bank and local United Way (Lecture Notes, 2014, pp.6, Par 2). In this case, the professional conflict between the school and other working positions is created. As a board member, he is required to perform administrative duties in all these institutions. These acquaintances can be attributed to the behavior on being absent in his administrative post at the school. However, at one time the superintendent was attending to a family emergency, and Dr. Myers needed his presence at the school. His absence at work place is also caused by the conflict in his personal relationship and professional life. Dr. Myers was justified and appropriate. As a board member, she had the opportunity to inspire people of Placid Falls. She developed a project that would increase the significance of the school in the district. She was hopeful and accurate that the project would be successful. However, to her disappointment she could get the superintendent to approve of her proposal. Furthermore, she was dissatisfied that she was not provided with the opportunity to present the proposal to the board. For this reason, she was angered by the school administration to ignore the seriousness of the issue. However, she was in a position to push her proposal to the board through other channels. Additionally, she could seek legal guidance from her husband on the best way to handle the situation. The role of a head school administrator requires a person that may spend a lot of time at their work station. For this reason,

Whether the Code of Ethics is an Effective Way of Effective Media Essay

Whether the Code of Ethics is an Effective Way of Effective Media Practice - Essay Example The emergence of developed techno-economic paradigm inevitably increases greater attention of the organisations or the agencies in order to revitalise their overall economic performance. According to the recent practices of the media and communication organisations it has been recognised that the codes of media related practices have drawn major interest towards increasing attention on a particular media enquiry, which has transformational influence on the overall communication and media industry (Christians, 2009). Moreover, the codes of practices also have been recognised to draw attention about any required changes in the media and communication policies in order to contribute to a transformational economy. However, ethics or the codes of media practices in Australia has also been recognised to bring major hurdles for the country’s media and communication industry in terms of substantially improving the media performance of the organisations (Media Entertainment & Arts Alli ance, 2013). Few of the key roles played by the ethics/codes of media practices have been critically described in the following sections. According to the current media and communication of Australia, the codes of ethics has long been witnessed to play a pivotal role not only to increase community awareness, but it also has major contribution on the transformational economic growth of the nation. The code of ethics of the nation has also been recognised in securing best practices of the media and communication organisations along with their wide range of practices. The codes of ethics in Australian media industry possess relatively simple and clearly identifiable factors that determine to improve efficiency of the organisations. The code of ethics of the country relies basically on four major factors, including honesty, fairness, independence and respect for the rights and liberties of others (Australian Press Council, 2014). In the context of honesty, conserving the way of honestly reporting and interpreting essential facts has been identified as a set of common and relatively best practices in the Australian ethical codes of media practices. In order to meet the requirement of honesty in response to the ethical codes, the process of striving accuracy along with fairness and revelation of each essential fact can be dully accepted towards securing ethical media practices across the nation (Australian Press Council, 2014).  

Evolution of Management Theory Case Study Example | Topics and Well Written Essays - 1500 words

Evolution of Management Theory - Case Study Example Classical theory is essentially a grouping of similar ideas on the management of organizations that developed in the late 1800’s and early 1900’s.This theory contains three general branches.Quintessentially, the theory emphasizes on economic rationality of the individual employee at work. The Rational economic view was based on the ideas if the 18th-century economist, Adam Smith. According to this school of thought, people are motivated by economic gains, therefore they key to drive employees was a monetary reward. Another noteworthy development of the classical period was the introduction of scientific management.F W Taylor is known as the father of scientific management. His contribution to the practice of management is widely recognized. Taylor was the first one to introduce a scientific approach to the study and practice of management. The essence of scientific management can be encapsulated in the following four ideas: 1. Each job should be divided into parts and a scientific method for performing each part should be determined. 2. The method of recruiting and training employees should be scientific as well. 3. Co-operation between the workers and management was regarded paramount to achieve a desirable outcome of the tasks performed. 4. Lastly, an emphasis was laid on the idea of division of labor.Managers were to supervise, plan and instruct whereas the workers were expected to carry out the execution part. Further on, Frank and Lillian Gilbreth refined Taylor’s methods. 's methods. They were also pioneers in the field of management and their most important contribution is the time and motion series and emphasis on improving efficency.The components of time and motion series are-break down each action into elements, find better ways to perform it, reoraganize each action to be more efficient. The Gilbreths also studied fatigue problems, lighting, heating and other worker issues. Administrative principles: Another group of classical theorists dealt with the operations of an organization as a whole unlike the aforementioned pioneers who focused mainly on individual workers. The Administrative theorist sought the most optimum way to combine jobs and people into an efficient organization. One of the forerunners of

Judiasm Essay Example | Topics and Well Written Essays - 750 words - 1

Judiasm - Essay Example One needs to include the thinking of a modern national identity that has a link with a specific land and culture and lastly, the description of Judaism must include the diverse sense of ethnicity allowing for secular Jews. Judaism cannot be generalized to refer solely or primarily to a religious faith as not all Jews believe in one God. There are some Jews who do not take part in the synagogue or home rituals. It is not, therefore, enough to say Judaism is merely faith among the many world religions. It should be clear to people that Jew and Judaism are relatively modern terms that need not be applied to the scriptural description of Judeans, Hebrews, and Israelites. This is to mean, the Judaism and Jews of this modern time have nothing to do with the scriptural description of the Hebrews, or the Christian scripture or the later church tradition. Not all Israelis are Jews, at the same time, it is important to understand that not all the Jews have a connection with the State of Israel. The scriptural Israelites should also not be confused with the todays Israelis. At the same time, the Jews should not be confused with the Hebrews or the scriptural Hebrews in either the Old or New Testaments. In each instance above, the term Jew has a different meaning. Judaism celebrates having both rich weekly and annual calendar. In their calendar, the Sabbath becomes their holiest day. The Sabbath here begins from Friday night to Saturday night. Both the creation of the universe and the Egypt exodus are related to the Sabbath, hence because its holiness. The period 1000-1650 C.E is referred to as the medieval period by the Jews where their relation with the major cultures and religions of both Islam and Christianity, took place. During this period, there was a tormented relationship between Judaism and Christianity. The period is also marked with the expelling of the Jews from the major

Devolution Essay Example | Topics and Well Written Essays - 2500 words

Devolution - Essay Example Regional or local governments who get the power of home rule may also get some legal powers to have their own legislative framework and legal rules which they can apply to their region exclusively. In the United Kingdom, a case of devolution in seen in the 1997 referenda in Wales and Scotland when a devolved or regional government was created and this was followed by the establishment of Scottish Parliament, National Assembly for Wales, Northern Ireland Assembly and Greater London Assembly in 1999 (see O'Neill 2004; Trench 2004). The proposals for a devolved state in Wales and Scotland were made in 1979 although the actual implementation of such a proposal could only be made two decades later. However there have been no devolved governments or devolution within England as the Labour government faced defeat in their proposals for a devolved regional government in North East England in 2004. Since then there have been no successful plans of devolution or formation of local and regional governments within England and all are failed plans. Apart from Wales and Scotland, there has been a system of home rule in the US as District of Columbia represents a regional and devolved government and is under the sole control of the United States Congress and the district government was created by statute. ... Fothergill discusses three government reports to argue that the new directions set by the Labour government do not take account of the accumulated knowledge or even the long history and background of the UK regional policy, Thus the regional policies which are already existing have serious lessons to impart which the new approach of Labour government seems to be overlooking or ignoring. The paper further states that, 'The new approach (of Labour) also prioritizes the devolution of decision-making over positive discrimination from the centre in favour of less prosperous areas'. Thus devolution has become not just a means of constitutional settlement but a dynamic process of change with possible uncertain consequences. In the later part of the analysis we will consider the process of devolution using case studies, examples and research reports. Implications of Devolution Even following devolution, there are many issues and concerns that are applicable to devolved governments. Elliott et al (2005) write that public sector pay is of critical concerns to governments of Westminster and Edinburgh. Public sector pay accounts for the major part of the government's expenditure and when not controlled by the central government, may have to be controlled according to budget in case of regional or devolved governments. The quality and range of services provided by the public sector is largely dependent on this pay controlled by the government. Within the UK, there is a national rate of pay that may not be sensitive to labour market conditions. However many recent changes have been made and consequently in Scotland there have been pay scale revisions and "public sector

Salary packaging and Taxation Essay Example | Topics and Well Written Essays - 5250 words

Salary packaging and Taxation - Essay Example Fringe benefits tax will apply to both Chris and his employer for this agreement during the FBT year that begins in 1st April 2011 up to 31st March 2012. Superannuation is money put in for a person's retirement. Strict government policy prevent untimely access to conserved benefits except in extremely limited and constrained circumstances, as well as severe financial adversity or on a compassionate basis, such as for medical cure not obtainable through Medicare. Usually, superannuation benefits are in three categories: conserved benefits; restricted non-conserved benefits; and unhindered non-preserved benefits. Mainly superannuation is concessionary taxed at a level charge of 15% at two key points: on contributions, and on salary. Capital Gain Tax inside the fund though is taxed at a charge of 10% if the properties held for longer than twelve months. Contributions whether in the type of employer superannuation, or associate salary sacrifice are levied at this rate. In the majority of the industry funds, the salary tax is paid prior to profits are disbursed to associates so it appears as a lesser level of interest on the worker’s statement. From the time when it was introduced, employers have been obligated to make compulsory contributions to superannuation in place of the majority of their workers. ... Superannuation contributions made by Chris are not treated as fringe benefits but as employer contributions. The initial contribution that Chris was making was $17,000. He however, decided to increase it by $15,000. This contribution has to meet three conditions, which are; it must be an arrangement before service there should be an agreement between West Gate Pty Ltd and Chris and Chris should not have an access to the sacrificed salary (Marsden, 2010). According to the Australian tax office ruling, the superannuation contributions are taxed in the superannuation funds such as 15% (Australian National Audit Office, 1999). West Gate Pty Ltd will therefore, pay the following amount in tax for contribution: 15/100 x $32,000 = $ 4,800 Chris has salary packaged other items apart from the superannuation contributions. The first item is a laptop that one of his children requires for school. It is worth $3,300. This is a fringe benefit for Chris. According to the Australian tax office rulin g S23, the tax is levied at 46.5% for the FBT year ending 31st March. West Gate Pty limited will pay the following amount for the benefit; 46.5% x $3,300 = $1,534.50 Under this, the income test will take into account the fringe benefit received. This fringe benefit is not included in the employee’s assessable income. The employer will be giving a benefit directly to a relative of the employee. Anything is accomplished by the employer in any agreement, arrangement or transaction so as to award any benefit upon any individual other than the member of staff, whether directly or obliquely. The benefit would have been taxed if it had been contracted to the employee. The next item that Chris has packaged is a new car. A taxable benefit is be

History and Literature Essay Example | Topics and Well Written Essays - 500 words

History and Literature - Essay Example History plays a decisive role in developing a nation’s culture. Literature, in turn, is based upon the culture of a nation. Thus, history affects the literature of a nation through culture. A lot of books have been published on the great battles that have occurred in the world from time to time. Other books that are not directly written on wars reflect the impacts of war on the society in different ways. Owing to the great role of history in shaping a nation’s literature, both are considered subordinates of each other. History brings facts into literature. In the contemporary age, facts and figures are valued a lot. Facts and figures play a fundamental role in enhancing the value of literature. Literature progresses with research. Research is fundamentally based on the literature review pertaining to the topic of research. Audience looks out for numeric figures that fundamentally come from the history. In the modern age, people are obsessed with the notion of â€Å"not hing but facts†. This has created a lot of schism between predictions and forecasts made on the basis of historic data. Nowadays, predictions are of no scientific value. Researchers are required to extrapolate the past trends to estimate the future. We get to learn a lot about history from the stories we read.

Career development Essay Example | Topics and Well Written Essays - 2000 words - 4

Career development - Essay Example 32). One aspect of substantive importance in the study of career development is that it differs depending on whether it is an individual involved or an organization. For individuals, career development involves a broader array of activities involving decision-making processes and planning, whereas, for organizations, it involves the practice of effectively managing the human resources workforce. However, for the case of this paper, focus is made on an individual basis. Self-efficacy involves making a person make a judgment on the ability to perform certain tasks. Unlike self-esteem that makes reflections on an individual’s worth or value, self-efficacy determines the confidence in an individual towards accomplishing certain tasks and reaching certain goals. A number of perspectives exist in the study of self-efficacy beliefs including the development and the dynamics involved. Ideally, self-efficacy beliefs have effects in all aspects of the human body, because through the determination of a person’s ability and belief towards the accomplishment of certain tasks. In return, self-efficacy affects situations by the use of power. It is substantively clear that self-efficacy beliefs have the necessary power that an individual requires to perform a certain task as well as make an informed decision in regard to a particular task. In life, tasks usually involve the numerous challenges faced, and as such, self-efficacy beliefs determine the ability to tackle the different life challenges by making the most appropriate and informed decisions. Four major theoretical approaches exist from which the study of self-efficacy beliefs emanates, especially in career development. Such include the social cognitive theory, social learning theory, self-concept theory, and attribution theory. Social cognitive theory makes emphasis on the development of an individual’s personality through observational learning and experiences from the

The resistance in a piece of wire Essay Example for Free

The resistance in a piece of wire Essay Also if the atoms in the material are more closely packed then the electrons will have more frequent collisions and the resistance will increase. I will use Nichrome only. 4 Density of wire- In a higher density wire there will be a higher resistance because there will be more fixed ions and more collisions. 5 Temperature of wire- If the wire is heated up the atoms in the wire will start to vibrate because of their increase in energy. This causes more collisions between the electrons and the atoms as the atoms are moving into the path of the electrons. This increase in collisions means that there will be an increase in resistance. 6 Shape of wire- the wire will be straight and taped to a meter rule, the shape of the wire may increase the resistance. 7 Voltage of 2 volts- I will have to keep a constant voltage because if the voltage changes then the resistance will change. The equation for resistance = voltage / current. If voltage increases, resistance increases. Apparatus The apparatus I will need to perform this experiment will be: 1 Power pack (2volts) 2 Ammeter 3 Voltmeter 4 6 wires 5 2 crocodile clips 6 Meter rule 7 Masking tape 8 Board marker Circuit diagram Method I have chosen to take a range of 10 lengths. I have chosen a range of 10 as to plot an accurate graph I will need at least 10 points to mark on the graph. The lengths that I have chosen are as follows: 10cm, 20cm, 30cm, 40 cm, 50cm, 60cm, 70cm, 80cm, 90cm and 100cm. I have chosen these lengths because the meter ruler can easily measure them and enough results to make a firm conclusion. To change the length of the Nichrome wire during the experiment I will tape down 1 meter of Nichrome 32 swg wire to a meter rule. I will then connect the 2 crocodile clips different distances apart using the measurements on the meter rule. The wire will be attached at X in the circuit. In my experiment I will find the current in the circuit using an ammeter and I will find the voltage in the wire using a voltmeter. I will take these two readings so I can then calculate the resistance using the equation resistance = voltage / current. I want to make my experiment as accurate as possible so I want to produce repeat readings so that I can find an average resistance. I will be using a variable resistor in my experiment to produce these repeat readings. I will draw 4 equally spaced points on the variable resistor with a board marker. To get my repeat readings I will move the variable resistor to these 4 points and get four readings for each length. After I have found the average resistance for each length of wire I will produce a graph showing the average resistance against the length of the wire. I will draw on my graph a line of best fit and then from this I will be able to see if my prediction was correct and if the resistance does increase when the length of wire increases. 1. Set up a circuit as shown above. Set the power pack at a constant voltage of 2 volts. 2. At X in the circuit the wire will be placed. I will first connect the crocodile clips 100cm apart. Then turn the voltmeter and ammeter on and ensure the variable resistor is set at the first point. 3. Now turn on the power pack and record the first results shown on the ammeter and voltmeter. I must take the first results because the results may change due to overheating if the power pack is left on. Now turn off the power pack. 4. To take my repeat reading of 100cm I will then move the slider on the variable resistor to the second marked point. I will now turn on the power pack and record the first result shown on the ammeter and voltmeter. 5. I will continue taking my repeat readings and moving the variable resistor along and recording the results for 100cm. 6. I will then change the length of wire to 90cm by moving the crocodile clips and i will set the variable resistor at the first point. Then I will turn on the power pack and record the first set of results. I will take 4 repeat readings for each length of Nichrome wire. 7. I will record 4 repeat readings for each length of Nichrome wire until I have results for all 10 lengths. Results table Length (cm) Repeat number Voltage (volts) Current (amps) Resistance (? ) Average 17. 82 I have put in bold any anomalous results. Analysing and considering evidence Conclusion From my graph I can tell that my prediction was correct. As the length increases the resistance increases, a piece of 20cm wire has a resistance of 3.8 ? and a piece of 30cm wire has a resistance of 5. 6 ?. This is because a longer piece of wire has a higher resistance because in a longer piece of wire there are more collisions between the electrons and the metal ions. In every successful collision energy is lost from the electron to the wire ions. The result is that the voltage of the wire increases. Because the equation for resistance is resistance = voltage / current, the resistance then increases. From my line of best I can also tell that as the length doubles the resistance always almost doubles too. A piece of 20cm wire has a resistance of 3.8 ? and a piece of 40cm wire has a resistance of 7. 4 ?. Double 3. 8 ? is 7. 6 ? this is almost double but not quite probably because my experiment was not quite accurate. A piece of wire 30cm long had a resistance of 5. 6 ? and a piece of wire 60cm long has a resistance of 11. 1 ?. This is also almost double, double 5. 6 ? is 11. 2 ?. The resistance doubles as the length doubles because there can be double the amount of successful collisions so double the amount of energy is lost causing the voltage to double and so the resistance doubles. Key Electron Metal ion Predicted results Length (cm)Predicted resistance ( ? ) Actual resistance ( ? ) Difference ( ? ) 1All of my results were quite close to my predicted results but as the length increases my predicted resistances become less accurate. This could have been for several reasons that are mentioned in my evaluation but probably as my experiment went on the wire overheated so my results became less accurate. Evaluating My method of collecting my results worked quite well. I gained the results I expected from my experiment. The quality of my evidence was good. My line of best fit went through almost all of my points on my graph and was quite similar to my predicted line of best. I did have some anomalous results. When I experimented with 10cm of Nichrome wire my fourth repeat readings was quite different to the other readings. It had a resistance 0. 87 ? that was the lowest repeat readings for 10cm. The second lowest was 1. 80 ? , this is quite a lot more than the anomalous result. When investigating which 30cm of Nichrome wire I had another anomalous result that was 6. 48 ? , the third repeat reading. This was the biggest repeat reading. The second largest was only 5. 89 ?. This could have been because:   I left the power pack on too long. This causes the wire to overheat.   When I was measuring the lengths of the Nichrome wire my measurements might have been slightly inaccurate. The rulers used might not have been exact and it was difficult to get an accurate reading of length by eye as the wire was not completely straight. Also the ruler may have been of different thicknesses throughout the length. This would have contributed as a slight error in my results.   The ammeter and voltmeter could have been slightly faulty and not given me correct, accurate readings. I connected the wire into the circuit using crocodile clips. These were quite loose and so this could have made my results less accurate. If I improved my method I could either attach the wires with tape but this may affect my results so instead I could solder the Nichrome wire into my circuit. It was difficult to adjust the variable resistor slider accurately only by eye. If I did the investigation again I could try to and adjust the variable resistor accurately I will use an advanced digital variable resistor.   I also found it difficult to measure exact lengths against the meter rule because the crocodile clips didnt clip on to the wire very securely. If I did the investigation again I could pre cut all the lengths of wire before the experiment instead of just connecting the crocodile clips at different distances apart on the meter rule. To further my investigation I could use the same method but increase the range of lengths. I could use lengths of up to 3 meters. I could take readings from lengths at smaller intervals; I could take reading every 5cm instead of every 10cm as I did. I could also take more repeat readings to get a even more accurate average. Show preview only The above preview is unformatted text This student written piece of work is one of many that can be found in our GCSE Electricity and Magnetism section.

Role of Financial Development in Total Factor Productivity

Role of Financial Development in Total Factor Productivity THE ROLE OF FINANCIAL DEVELOPMENT IN TOTAL FACTOR PRODUCTIVITY OF VIETNAM’S MANUFACTURING SECTOR Thesis Research Design Instructors: Team of MDE Lectures Student:Hà ¡Ã‚ »Ã¢â‚¬Å" Bà ¡Ã‚ ºÃ‚ £o Trà ¢n 1. Problem statement There is a large literature about the link between financial development and economic growth. Many studies indentify that productivity as one channel through which finance affects growth. The importance of financial development in raising productivity and promoting economic growth has been discussed in many reports (e.g., Goldsmith 1969; McKinnon 1973; Shaw 1973; Greenwood and Jovanovic 1990; Bencivenga and Smith 1991). The financial system pressure handicaps financial development and results in misallocation of resources, then reduce productivity and economic growth. As the financial systems develop well, overall economic productivity will be improved through the efficient reallocation of resources. At firm level, financial development of a firm allows a firm to appropriate new business opportunities, conduct investment and research activities, make a defense against financial and non-financial shocks and achieve higher productivity. More importantly, firm productivity is an essenti al indicator in transforming financial market development to economic growth at macro level. There are also many empirical studies about the impact of financial development on productivity efficiency. Levine (2005), Beck et al. (2005) point out that financial constraints, including low liquid and limited access to financial resources, make the growth prospect of firms worse. In Vietnam, manufacturing firms play an important role in the decade of economic growth. In 2013, there are 60700 businesses closed. There are many reasons such as long loss profit, management capacity, operating restrictions and lack of funds business†¦ In which, financial market development offers a crucial impetus for enhancing firm competitiveness and catalyzing industrialization. In Vietnam the scientific research using a panel data to find out the role of financial development in total factor productivity of Vietnam’s manufacturing sector is limited. This study will present the evidence of this linkage using panel data for manufacturing firms from 2003 to 2009. 2. Research objective 2.1. Research objectives To estimate the TFP growth rate of manufacturing sector To find the role of financial development in total factor productivity of Vietnam’s Manufacturing Sector. To give policy implication for improving firm productivity 2.2. Scope of the study The study will examine the role of financial development in total factor productivity of Vietnam’s Manufacturing Sector using the panel data of 2003, 2005, 2007, and 2009. 3. Literature review 1. Productivity: Concepts and measurements Productivity is commonly defined as a ratio of a volume measure of output to a volume measure of input use (Schreyer and Pilat 2001) or in other words, how much of output which is obtained from a given set of inputs (Syverson 2010). Productivity = Quantity of outputs produced/ Quantity of inputs consumed Productivity measurement efforts to point out improvements in using the capital resources, that is, to motivate and evaluate efforts to produce more inputs with fewer inputs while maintaining quality. TFP is used to measure the firm productivity. It captures the growth, which could not be explained by changes in production inputs, thus it can serve as a traditional proxy of productivity improvement. However, there is a correlation between unobservable productivity shocks and optimal choices of input. There are at least two approaches to measure the TFP, which account for the sensitive of optimal input levels to the productivity shocks. First approach is the Olley-Pakes TFP measurement which uses investment as a proxy for productivity shocks (Olley and Pakes 1996). Another approach is the Levinsohn-Petrin TFP measurement which uses intermediate inputs as a proxy for productivity shocks (Levinsohn and Petrin 2003). In this study, I will use the Levinsohn-Petrin TFP measurement to control for the unobservable productivity shocks because of three reasons. Firstly, the dataset of firm investment is not available, thus the the Olley-Pakes TFP measurement will not be feasible. Secondly, even if the investment data is available, the estimation can be suffered from the truncated report â€Å"zero† investment of firms. Finally, the Levinsohn-Petrin TFP measurement is more acceptable than the Olley-Pakes TFP measurement because of it is built from production theory. Assuming a Cobb-Douglas function, TFP is often computed by estimating the equation: yit = ÃŽ ²0 + ÃŽ ²llit + ÃŽ ²kkit + ωit + ÃŽ µit (1) Where yit is firm’s output, lit is firm’s labor, kit is firm’s capital; y, l, k are all in the nature logarithm forms. i and t denote firm and time. ωit is a state variable, which measures productivity. ÃŽ µit is an error or a random productivity shock. Both ωit and ÃŽ µit are unobservable variables. According to Olley and Pakes (1996), the OLS estimates of (1) can be biased because choice of variable inputs can be depended on the firms’ beliefs about the state variable ωi. If there is serial correlation in ωi, the variable inputs such as labor, materials, etc will be positively correlated with ωi. In order to control the bias in OLS estimates, they suggest the following partially linear model: yit = ÃŽ ²0 + ÃŽ ²llit + ÃŽ ²kkit + ht(iit, ait, kit) +ÃŽ µit (2) in which ωit =ht(iit, ait, kit), ait is age of firm i at time t, iit is investment of firm i at time t. The unobservable variable ωit can be expressed by a function of observable variables. Levinson and Petrin (2003) point out that investment data at firm level is very lumpy (there are considerable adjustment costs). If it is true, the investment proxy will not smoothly respond to productivity shock. It violates the consistency condition. They propose the following modified model: yit = ÃŽ ²0 + ÃŽ ²llit + ÃŽ ²kkit + ÃŽ ²mmit + ωit + ÃŽ µit (3) mit is the logarithm of the intermediate inputs such as raw material, power, and electricity expenditures. Its input demand mit depends on the capital variable kit and productivity ωit mit = mt (kit, ωit) The demand of intermediate inputs mit is assumed to be monotonously increasing with ωit. It can be used as a proxy for unobservable variables. Therefore, the unobservable productivity ωit is expressed by the function of two variables kit and mit. ωit = mt (kit, mit) Substituting above equation to equation (3), the production function can be estimated. The coefficients of kit and mit can be recovered by GMM method with assumption that productivity is controlled by a first-order Markov process. ωit = E[ωit/ωit-1] + ÃŽ ·it ÃŽ ·it is an innovation to productivity which can be correlated with labor but uncorrelated with capital. The logarithm TFP of firm can be obtained from the residual of actual output and predicted output. 2. Financial development and firm productivity The important role of financial development in raising productivity and promoting economic growth has been mentioned in many public researches. In traditional growth theories, the role of financial development in growth is through factor accumulations, which are regarded as the main force behind economic growth. Financial development can contribute to total factor productivity growth by increasing marginal productivity of capital (Goldsmith 1969). According to McKinnon and Shaw (1973), financial development also can improve efficiency of capital allocation so as to increase the aggregate saving rate and investment level. However, in traditional growth model, the impact of financial development on growth is limited due to diminishing return to scale of capital. Some recent researches also highlight the relationship between financial development and productivity growth. Jeanneney, Hua and Liang (2006) analyze data from 29 Chinese provinces and find out that financial development has contributed significantly to TFP growth through its positive effect on efficiency in the period from 1993 to 2001. Dabla-Norris, Kersting and Verdier (2010) use firm level dataset and find out that the positive effect of innovation on firm productivity is contributed from financial system. Firms enjoy the maximum benefits from innovation in countries with well-developed financial system. Minjia Chen (2012) examine a panel dataset of Chinese manufacturing firm from 1998 to 2007 also show that financial factors are highly essential to firms’ total factor productivity growth. At micro level, financial development affects productivity growth by various channels. A firm with better financial health tends to bring higher productivity level. Beck et al (2005) suggest that firm with high liquidity is expected to be resilient to financial and non-financial shocks. Similarly, entrance to large external finance can help a company reduce the level of credit constraints, therefore increase their ability and existence in the market (Aghion et al 2007; Levine 2005). 4. Overview of Vietnam SMEs In Decree 90/2001 ND-CP from 2001 to 2009, SME is defined as an independent business establishment which registered capital not exceeding 10 billion VND or annual average number of workers not exceeding 300. From 2009 up to now, SME is defined as: Small and medium enterprises are business establishment which have registered their business according to the law and are divided into three levels of size: very small, small and medium depend on the sizes of their total capital or their average number of workers (total capital is the priority standard). In term of size of employees, nearly 98.34% of firms are small or medium enterprises in 2012. These firms contributed to 40-60% GDP of Vietnam and over a half of total labors in 2011. SME has important role in Vietnam economy. The SME survey has been conducted by the Central Institute for Economic Management (CIEM), the Institute of Labour Science and Social Affairs (ILSSA) under the Ministry of Labour, Invalids and Social Affairs of Vietnam (MoLISA) and the Development Economics Research Group (DERG) of the University of Copenhagen. The research group selects ten provinces including: Hanoi, Hai Phong, Ho Chi Minh City (HCMC), Ha Tay, Phu Tho, Nghe An, Quang Nam, Khanh Hoa, Lam Dong and Long An. The sample covers around a third of manufacturing firms in Vietnam and seems to be the best quality to represent the characteristics of SMEs in Vietnam. 5. Methodology 5.1. Model Model: TFPit = ÃŽ ±0 + ÃŽ ±1 TFPi,t-1 + ÃŽ ±2 ln LIQUIDITYit + ÃŽ ±3 ln LEVERAGEit + ÃŽ ±4 ln SIZEit + ÃŽ ±5 ln AGEit + ÃŽ ±6 ln COMit + ÃŽ ±7 ln HUMANKit + ÃŽ ±8 ln FOWNit + uit Where i and t are index firm and time, respectively, uit is the stochastic error term. The lagged TFP variable is important due to Levinson and Petrin (2003) estimation method. The authors assume that firm productivity follows a first-order Markov process. Therefore, the lagged TFP variable must be taken in the model for controlling the serial correlation. About the variables of financial development at firm level, my econometric specification contains two proxies of a firm’s financial quality: liquidity (LIQUIDITYit) and leverage ratio (LEVERAGEit). A firm with better financial health tends to bring higher productivity level. Beck et al (2005) suggest that firm with high liquidity is expected to be resilient to financial and non-financial shocks. Similarly, entrance to large external finance can help a company reduce the level of credit constraints, therefore increase their ability and existence in the market (Aghion et al 2007; Levine 2005). Besides, we also control for several firm-specific characteristics to examine firm productivity performance. Firms’ size (SIZEit) intends to control for the impacts of economies of scale on firm productivity (Balk 2001). Firms’ size (SIZEit) and Firms’ age (AGEit) have been found to be linked to firms’ productivity (e.g. Palangkaraya, Stierwald and Yong, 2009) and are used widely in analyzing firm productivity. Oliner and Sichel (1994; 2000) indicate high-tech capital intensity (COMit) as another determinant of TFP. High-tech capital accumulation has been proven to be an essential factor for raising productivity by improving operational efficiency, profits and, finally, productivity growth (Siegel and Griliches 1992). Another determinant should be considered that is human capital intensity. Since the 1990s, developing countries in Asia, including Vietnam, have been focused on investing human capital, e.g education and training, to achieve higher economic growth. Therefore, it may be interest to estimate the extent of human capital intensity account for TFP. The last important determinant of firm productivity is mentioned widely in many researches of Arnold and Javorcik (2009), Benfratello and Sembenelli (2006), Germa et al. (2004) and Griffith (1999) is foreign ownership (FOWNit). These researches suggest that foreign owned firms are potential to have superior managers, information network and ease to connect international market. Therefore, foreign firms are supposed to get higher productivity than domestic firms. 5.2. Research hypotheses Hypothesis H1: Financial quality (liquidity ratio) will have positive relationship with firm productivity. A firm with high liquidity tends to bring higher productivity level. Hypothesis H2: Financial quality (leverage ratio) will have positive influence on firm productivity. 5.3. Data sources All data sources are available at the Survey of Small and Medium scale manufacturing enterprises (SMEs) in Vietnam, from 2003 to 2009. It gives data about production and financial characteristics of firms such as gross revenue, capital, number of labors, materials, profits, liquid assets, fixed assets, liabilities, equity†¦ The measurement of TFP: requires information on a firm’s gross output and production inputs. Net output is measured by net sales of manufactured goods. There are three inputs in the empirical model: labor, capital and intermediate materials. Labor is the number of employees working for a company. Intermediate materials include components used in the manufacturing process. Capital is measured by the value of land, building as well as machinery, equipment, excluding the depreciation of assets. Financial development variables: First variable is liquidity, which is measured by the ratio of liquid assets to total assets. Second variable is leverage ratio that is measured by the ratio of liabilities to equity. Control variables: Firm size is measured by the total sales of a firm. Firm age is measured by the number of years a firm in operating. If a firm goes in an industry for less than one year, it is set up for zero. High-tech capital accumulation is measured by the number of computers used for each worker. The proportion of skilled labor to total workers of a firm serves as the proxy of human capital investment. Finally, the ratio of investment capital undertaken by foreign parties relative to the total registered capital is used as a proxy of foreign ownership. Finally, the ratio of actual investment capital of foreign parties compared to the total registered capital is served as a proxy of foreign ownership. References: Aghion, P., T. Fally, and S. Scarpetta. 2007. Credit Constraints as a Barrier to the Entry and Post-entry Growth of Firms. Economic Policy 22: 731–119. Arnold, J.M., and B.S. Javorcik. 2009. Gifted Kids or Pushy Parents? Foreign Direct Investment and Plant Productivity in Indonesia. Journal of International Economics 79: 42–53. Balk, B.M. 2001. Scale Efficiency and Productivity Change. Journal of Productivity Analysis 15: 159–183. Beck, T., A. Demirguc-Kunt, and V. Maksimovic. 2005. Financial and Legal Constraints to Firm Growth: Does Firm Size Matter? Journal of Finance 60: 137–177. Bencivenga, Valerie R. and Bruce D. Smith, (1991), Financial intermediation and endogenous Control Unobservables†, Review of Economic Studies, Vol. 70, No. 2, 317-41. Benfratello, L., and A. Sembenelli. 2006. Foreign Ownership and Productivity: Is the Direction of Causality So Obvious? International Journal of Industrial and Organization 24: 733–751. Dabla-Norris, Kersting and Verdier, (2010), Firm productivity, innovation and financial development, International Monetary Fund. Girma, S., H. Gà ¶rg, and E. Strobl. 2004. Exports, International Investment, and Plant Goldsmith, Raymond W. 1969. Financial Structure and Development. New Haven, Conn: Yale University Press. Greenwood, Jeremy and Bruce D. Smith, (1997), Financial markets in development, and the development of financial markets. Journal of Economic Dynamics and Control 21: 145-81. Review of Economic Studies 58: 195-209. Griffith, R. 1999. Using the ARD Establishment Level Data to Look at Foreign Ownership and Productivity in the United Kingdom. Economic Journal 109: F416–F442. Levine, R. 2005. Finance and Growth: Theory and Evidence. In Handbook of Economic Growth Vol. 1, pp. 865–934, edited by P. Aghion and S. Durlauf. Amsterdam: North-Holland. Levinsohn, J., and A. Petrin. 2003. Estimating Production Functions Using Inputs to control for Unobservables. Review of Economic Studies 70: 317–341. Minjia Chen, (2010), Financial Effects and Firm Productivity: Evidence from Chinese Manufacturing Data. Oliner, S., and D. Sichel. 1994. Computers and Output Growth Revisited: How Big Is the Puzzle? Brooking Papers on Economic Activity 1994: 273–334. Oliner, S., and D. Sichel. 2000. â€Å"The Resurgence of Growth in the Late 1990s: Is Information Technology the Story?† Journal of Economic Perspectives, Vol. 14, pp. 3–22. Olley, S., and A. Pakes. 1996. The Dynamics of Productivity in the Telecommunications Equipment Industry. Econometrica 64: 1263–1289. Palangkaraya, A., Stierwald, A. and Yong, J. (2009), â€Å"Is Firm Productivity Related to Size and Age? The Case of Large Australian Firms†, Journal of Industry, Competition and Trade, Vol. 9, No. 2, 167-95. Performance: Evidence from A Non-parametric Test. Economics Letters 83: 317–324. Schumpeter, Joseph A, (1911), The Theory of Economic Development. Cambridge Mass: Harvard University Press. Siegel, D., and Z. Griliches. 1992. Purchased Services, Outsourcing, Computers, and Productivity in Manufacturing. National Bureau of Economic Research Working Paper 3678; Output Measurement in the Service Sector, edited by Z. Griliches. Chicago: University of Chicago Press. Sylviane Guillaumont , Jeanneney, Ping Hua Zhicheng Liang, (2006), Financial Development, Economic Efficiency, And Productivity Growth: Evidence from China, The Developing Economies, Institute of Developing Economies, vol. 44(1), pages 27-52. Thangavelu, Shandre M., (2013), Financial Health and Firm Productivity: Firm-level Evidence from Viet Nam, ADBI Working Paper Series. Zhenhui, Sudeshna, (2013), Financial Development and Total Factor Productivity: Evidence from India’s manufacturing sector, Georgia College State University.

Benefits of Green Supply Chain Management

Benefits of Green Supply Chain Management Consciousness about the environment has been on the increase in the past few decades. Worlds environmental problems such as global warming, toxic substance usage, and decrease in non-replenishable resources has caught up amongst the people now. The Governments around the world are releasing campaigns to take this problem to people. Quite a few organizations have responded by using ecological principles to their business, such as reducing the energy use of oil, using environmentally friendly material first, and using recycled paper for packaging. Ecological principles have been extended to many departments within the organization, including the supply chain. environmental management of the supply chain (GSCM) made its appearance in recent years. This concept encompasses all steps in the manufacture of the first to the last stage of the lifecycle, from product design to recycling. Green Supply Chain Management can also be used for other economic sectors like government, education and s ervices apart from manufacturing. The aim of this paper is to express the impact of green in the management of the supply chain. It starts with the basics of Supply Chain Management of the company at different levels. Then he covers the chronology and the benefits of Green Supply Chain Management. What factors influence society to adopt the Green Supply Chain?These factors can be classified according to different players such as government, whole of market, industry, competitors, and society. Since Green Supply Chain Management can be applied to various areas within the company, this document also addresses the implementation of Green Supply Chain Management in several areas.In addition, a few examples of Green Supply Chain Management application is also demonstrated to support the concept. Table of Contents (jump to) Introduction Basics of supply chain management Supply Chain Integration Chronology of GSCM Objectives of GSCM Listening to Environmentally Aware Consumers Profiting from Being Green Unawareness of Potential Benefits Green Design Green Operations The Case of Kodak: Green Technological Advancement Why Change to Green Supply Chain Management? Conclusion Introduction Supply chain management has been viewed conventionally as a process in which the raw materials are converted into finished products, and are then provided to the end-customer. This whole course of action requires extraction and exploitation of various natural resources. The point to be noted here is that however, we live in an era where environmental sustainability has become an important concern to business practices. Manufacturers for a very long time now have been facing the pressure to concentrate on Environmental Management (EM) in their supply chains. However it is not at all an easy task to perform. The blending of the green concept to the supply chain concept affixes a new concept where the supply chain will bear a straight relation to the environment. This fact is interesting because both these paradigms were contradictory in the past. Supply chains, from an operational point of view, are all about mining and exploiting the raw materials from the environment. This paper will present a general idea about the Green Supply Chain Management (GSCM) literature. Knowledge of the broader outlook of the Green supply chain is the most important step in getting an insight about the branch of environmental sustainability. There is a vast span of literature available on the subject of green supply chain management, especially from 1990s to the present. But the key arguments that were drawn out of the Green supply chain Management literature over the last almost two decades are the concepts of green design, green operations, green manufacturing, waste management and reverse logistics. The purpose of this paper, however, is to provide insights on some of these topics and present an overview of the academic standpoint of the Green Supply Chain Management literature. This paper will begin with discussing the traditional supply chain management and will then proceed by moving on to chronology of the Green Supply Chain Management. This paper will then furth er move on to talk about the idea of Green Design and Green Operations. At the end, this paper contains a brief talk about why organisations go for a Green supply chain? Basics of Supply Chain Management The term supply chain originated around the mid 1970s. Supply chain was used as a term for transferring on electricity towards the final customer. However the term supply chain management came into the picture not until the late 1980s. The potential benefits of integrating the various internal business functions which included purchasing, manufacturing, sales and distribution into one interrelated framework were discussed. Since then supply chain management has been defined as the integration of business functions involving the flow of materials and information from inbound to outbound ends of the business. Twofold or party relationships between the suppliers are becoming a part of the supply chain process. Here the formulation of a supply chain framework in terms of establishing contracts between firms can be seen. The opportunity to either vertically integrate or market their products in connection with other partners has been given to the organisations. Supply Chain Integration The concept of Supply chain management evolved dramatically around the early 1990s.It turned out to be so due the increasing importance of the relationship of the firm with other suppliers. One of the possible reason for this was the emergence of a globalised marketplace. The firms needed to become more integrative amongst other firms to reduce the susceptibility of its supply chain. There are various examples and case studies where the firms have become or are becoming more integrative to their supply chain partners. A few good examples can be 1.) the Japanese automotive industry and the Italian craft-based industry. The operational processes of the supply chain are enhanced by the help of the added factors such as Lean and Just-In-Time (JIT) Management. The requirement of the organisations to become dynamically quick to respond to the needs of customers has become increasingly important.The contributing factors that would make firms more competitive are: speed (delivering customer demand quickly), agility (responsiveness to customer demand) and leanness (doing more with less) The Chronology of Green Supply Chain Management (GSCM) An emerging field that fibres out of the traditional supply chain perspective is Green supply chain management (GSCM). Businesses have been sparked to become more environmentally conscious by the quality revolution in the late 1980s and the supply chain revolution in the early 1990s. Green Supply Chain Management has gained popularity in both academics and professionals to intend in reducing waste and safeguarding the quality of product-life and the natural resources. Now the important assets to achieve best and state of art practices are Eco-efficiency and remanufacturing processes. The demand of the Global markets and pressures from governments are forcing businesses to become more sustainable. In my personal opinion, increase in government regulation and stronger public mandates for environmental responsibility have brought these issues onto strategic planning agendas, and into the executive suites. The key argument that came out in the literature over the last two decades are the concepts of: green design, green operations, reverse logistics, waste management and green manufacturing . The very first green supply chain came into existence in 1989. It was the first of its kind literature that developed a finest forecasting system for organisations to use and to forecast products that can potentially be reused/recycled. This forecasting system, however, was exceedingly controversial as individuals returning containers is not typically known with confidence, so therefore, the findings were somewhat unintelligible. The first green design literature came into context in 1991 with the aim of considering the need for a green design to reduce the impact of product waste. Further Life-cycle analysis was an example of a structure that came out of green design. Green Operations in terms of reverse logistics was an important concept that came out of the Green Supply Chain Management concept. The use of plastics and bottle recycling came up by late 1990s and early 2000. Waste management is another topic that came out of the Green Supply Chain Management literature. Green Manufacturing, on the other hand, was not conceptualised until 1993. Objectives of Green Supply Chain Management (GSCM) The purpose of the whole supply chain must be green to help the company achieve its environmental objectives. To facilitate this, employees must learn strategies on green procurement, understand business practices, corporate social responsibility strategies define, develop logistics processes more efficiently, and learn about the alignment of the chain supply to meet the goals of corporate sustainability. Every company that manufactures and sells products uses packaging materials every day. Packaging is used everywhere starting from moving raw material to a manufacturer followed by bulk finished goods to a distribution centre and in the end the final product to the customer. The packaging material executes a number of tasks; protects the objects from damage, from the ecological circumstances, and also make the objects easier to transportation and to make the item eye-catching to the customer. However, as the publics opinion about the environment is changing, companies are looking at how they can shift to greener packaging alternatives. A few of the suggested alternatives are: Recycled Content In packaging materials from recycled materials is available, including corrugated cardboard, molded pulp, cardboard, steel, newsprint, aluminum, glass and some but not all plastics. It is common practice to include some level of recycled content for certain packaging materials. Post-Consumer And Pre-Consumer Content The term post-consumer shows the finished products that were used by the consumer, then removed from waste for recycling. Materials recycled by households and non-residential users such as offices, manufacturers and retailers are included in the post-consumer materials. Examples of post-consumer materials include foam block, newspapers, glass and aluminum containers, and corrugated cartons. Pre-consumer content is different from post-consumer in that it includes the waste left by the methods of processing and printing, rejected by the manufacturer before it is used by the consumer. Either total recycled content by combining the totals for the period before post-consumer and / or the post-consumer recycled content is provided by the manufacturers. The environmental benefits are provided by both pre-consumer and post-consumer recycled materials. The use of recycled materials supply market with post-consumer items that are sorted to be recycled by consumers. Paperboard Packaging Cardboard is used for packaging materials in a variety of industries because of its cost, versatility and low durability. Increasing amounts of cardboard with post-consumer recycled materials are used by businesses because of its quality, cost advantage and a reduced impact on the environment. Companies have adopted the use of recycled cardboard in products reaching the consumer in mind to improve the quality, variety and availability of recycled cardboard. Various studies around the world today show that over 50% of products on supermarket shelves are packed in recycled cardboard. According to a survey conducted by the Alliance of recycled cardboard, 61% of consumers are more likely to buy a company that uses recycled cardboard packaging. The study also revealed that 77% of consumers felt better about a company that uses recycled cardboard and 80% said do something good for the environment when they buy products with recycled cardboard packaging. This suggests that the growing awareness of environmental issues by customers and the efforts that manufacturers regarding the use of recycled packaging does not go unnoticed. As companies move towards policies more friendly environment, a change effort that can be made throughout the supply chain that should not increase the overall cost is to improve the use of recycled packaging. Products such as recycled cardboard, which are now available are of high quality, low cost and are a major concern for consumers. Listening to Environmentally Aware Consumers As the community becomes more and more aware of the issues regarding the environment and global warming, consumers will be bound to ask more questions about the products they are purchasing. Some of the questions that the companies face today are: how green their manufacturing processes and supply chain are? How much is their carbon footprint? and How they recycle? Profiting from Being Green The myth that going green will result in lower profits and increased operational costs has disappeared as many companies now have realised that its not a bad thing and have been able to satisfy the customers desires to incorporate green initiatives in their supply chain processes and also convert it into increased profits. A number of companies have established the fact that there is a link between improved environmental performance and financial gains. Companies have had an insight into their supply chains and found out areas where improvements in the way they operate can result into increased profits. Just for an example General Motors condensed their clearance costs by $12 million by setting up a reusable container program with their suppliers. In a desperate attempt to reduce the costs throughout their supply chain, General Motors derived that the cost reductions they realised match the companys commitment to the environment, maybe General Motors may have been less concerned about the green issues if they were making record profits. Unawareness of Potential Benefits By reducing the environmental impact of their business processes, companies can find cost savings. Savings are often seen as an advantage to implement environmental policies, by re-examine the supply chain business, procurement, planning and management of material consumption for dispatch and delivery of finished products. Benefits attributed to reducing the environmental impact of a company are not in the minds of the executives of the supply chain despite the public emphasis on the environment. It shows that many executives are still unaware that improving the environmental performance of waste disposal and resulting low training costs, less the costs of environmental permitting, and often, reduced material costs. The expectation of an interest in environmental issues and environmental concerns by the community will not diminish as economic issues become more important because of the faltering economy.. Green Design Green design is a vital sub-theme to Green supply chain management. It encourages environmental awareness about designing a product or a service. Organisations have specific prospective to become eco-friendly in the direction of product re-manufacturing. Heavy industries that have intricate supply chains must take into concern the benefits of reverse logistics (RL). ISO14000 was introduced as a result of the Rio Summit on the Environment in 1992. The pressure groups calling for firms to encourage greening of their supply chains are growing. In 1998 a two-level location model is proposed on product recovery with the support of the Dutch government. The role of purchasing in reverse logistics system and design was examined. All the manufacturing plants that participated in the above mentioned model concluded that all of them were in favour of reverse logistics without government legislation having been imposed. Life-cycle Analysis Life-cycle analysis is an imperative part of Green Design. To measure environmental and resource related products to the production process life-cycle analysis was introduced. This measurement involves everything that comes in stages starting from extraction of raw materials, production, distribution, and remanufacturing, recycling and final disposal. Life cycle analysis scrutinize and enumerate the energy and materials used and wasted and measures the impact of the product on the environment. Government policies are also an additional feature for organisations to work in the direction of life-cycle analysis. Green Operations Reverse logistics Reverse Logistics (RL) is the contrary of traditional or forward logistics. A process where a manufacturer accepts previously shipped products from the point for consumption for possible recycling and re-manufacturing is reverse logistics. Various studies report that reverse logistics have been extensively used in automobile industries such as BMW and General Motors. Other companies such as Hewlett Packard, Storage Tek and TRW are also using reverse logistics as a supply chain process. Following reverse logistics would sooner or later help firms become more aggressive and competitive in their own industry. First stage in the recovery process is the Collection stage. For remanufacturing products are selected, collected and transported to facilities. To begin the converging process, the used products came from different sources and should be brought to product recovery facility. When sorting reusable products Sorting and Recycling are also an important mechanism. The collection schemes should be classified according to materials whether separated by the consumer (separation at source) or centralised (mixed waste). The end objective is to arrange products that can be reused to trim down costs of making new products. Implementation of GSCM to various areas Companies are investigating all aspects of their supply chain to reduce costs.A key element of any program of cost reduction is implemented waste reduction. There are a number of processes that can be used to reduce waste in the supply chain of a business. Design of product To identify where the use of raw materials can be reduced or high-priced materials be replaced, many companies are probing the design of their products. Indeed many businesses are reviewing each component to identify whether it can be manufactured or purchased at a lower price. Companies are examining cheaper and less wasteful materials when designing product packaging options. Raw material Management Every production process should be investigated to reduce the waste of raw materials. Waste material that cannot be recycled or reused must be redesigned in manufacturing operations processes. Even in processes that do produce waste that can be recycled should be examined due to the costs in recycling processes. Using Scrap Material The use reuse of waste material can be stretched out as well as minimizing the waste of raw materials in manufacturing processes. Improvements in the technology of reclaiming waste material means that companies that formerly discarded waste products now have the capability to reuse that material. The costs will inevitably fall helping more businesses with waste issues as the recycling technology becomes more available. Quality improvement Quality control is present in all manufacturing processes but usually aims on the finished product rather than reducing waste. Minimizing the waste of raw materials as well as producing a quality product should be the goal of quality management. Improving the overall quality of a companys manufacturing process will reduce waste overall as it will increase the quantity of finished goods that pass quality inspection. The Case of Kodak: Green Technological Advancement Since the early 1990s, the need for technological advancement to Green Operations is becoming more popular. The new economy has encouraged firms to be more environmentally sustainable and eco-efficient. Kodak is an example of a company that has a remanufacturing line to the supply chain. It is reported that 310 million single-use cameras have been returned since 1990. Although the timing of returns of singleuse cameras is unknown, Kodak has managed to allocate 310 million singleuse cameras back into their production line. The reason for this success came from its own product design. Kodaks single-use cameras are simple, reusable and easy to recycle, and because of this, Kodak has managed to reuse their products and save costs. Xerox Europe, US Naval Aviation are also good examples of Green Operations. Companies are encouraged to have Green Logistics due to various legislations. Producer responsibility has always been, and is still, a growing concern. This concern is important because organisations are now beginning to become more rational in preserving the natural resources and the environment. Why Change to Green Supply Chain Management? There are different thrusts for companies to change to a greener supply chain than the existing one. Some organisations are simply doing this because it is the right thing to do for the environment even though some of the motivators are quite unclear. Maybe some are more fundamental to environmental change, but others may not. Studies, however, reveal that profitability and cost reduction are some of the main motivators for businesses to become green in the supply chain. Reverse logistics were motivated primarily by economic factors and not concerns about protecting the eco-system. The reverse logistics can only bring about profitability and reduction of waste. Advertising took this idea further and argued that Green Supply Chain Management practices are only about win-win relationships on environmental and economic performance. There are hidden values to reverse logistics and the companies need to admit it.. The customers, on average, return about 6% of the products they buy. These products can be from plastic bottles to boxes. If organizations can capture this 6% return from the consumers,they will be able to cost-save. Doing this, however, still remains an issue. Reverse logistics can cost-save only if done precisely. Saying this means that before going any further to green logistics, organisations must have a core vision to promote Environmental Management. Conclusion The intention of this paper is to briefly provide an outline of the Green supply chain literature. This paper argues that the ecological impacts of industrial activity has been reduced by the help of Green Supply Chain Management.. Key academics have argued different angles to Green Supply Chain Management. The concepts of green design, green operations, reverse logistics, waste management and green manufacturing are the key themes that came out of the Green Supply Chain Management literature over the last two decades. This paper, however, briefly discussed some of these issues and, first of all, a brief introduction to conventional supply chain management was provided, then a discussion to the chronology of Green Supply Chain Management and green supply chain as a discipline. Green design and green operations were briefly discussed next. The motive for organisations to go towards green operations was dealt in the last part of this paper. Even though Green Supply Chain Management has been scrupulously reviewed, there are areas around Green supply chain that still require further study. One is a gap in the literature in terms of the stakeholders views towards green supply chain. Stakeholders views can sometimes be contradictory to the companys point of view. Normally, when the word natural environment and sustainability comes into the picture, this is seen as a restriction to the organisations generation of profits by most operation managers and stakeholders. Some stakeholders would go against green supply chain management and some would not. This paper recommends that researchers should focus more towards qualitative study such as interviews in understanding the variation in different stakeholder views towards green supply chain management to depict the varied views about the concept and how this, in the end, implicates management decisions.

The Life and Times of Claude McKay Essay -- essays research papers

The life and Writings of Claude McKay Introduction Every literary period can be defined by a group of writers. For the Harlem Renaissance, which was an extraordinary eruption of creativity among Black Americans in all fields of art, Claude McKay was the leader. Claude McKay was a major asset to the Harlem Renaissance with his contributions of such great pieces of writings such as â€Å"If We Must Die† and â€Å"The Lynching.† McKay wrote in many different styles. His work which vary from â€Å"dialect verse celebrating peasant life in Jamaica, to militant poems challenging white authority in the United States, to philosophically ambitious novels about the effort of blacks to cope in western society† (â€Å"Claude McKay† 1375) displays the depth of this great writer. The main ideals of this poet were to raise social issues and to inspire his people. McKay used his writing as an outlet for his feelings of distrust toward those who he believed oppressed his people. In many ways McKay’s writing aff ected his life, but in even more ways McKay’s life affected his writing. The writings of Claude McKay were constantly changing throughout his life and caused him to be the most dynamic poet of the Harlem Renaissance. Biography Claude McKay was born in Sunny Ville Jamaica on September 15 in 1880 to Thomas Francis and Ann Elizabeth McKay (Ali 201). McKay grew up in a relatively prosperous family and had British schooling in the predominantly black small town of Sunny Ville. It was in his British schooling that McKay learned about traditional forms of writing such as sonnets. However, McKay learned an alternative education from his father who gave him his strong sense of African pride. Claude McKay’s father told him about his ancestry and Claude McKay’s grandfather’s life as a slave (Masiello 244). From these lessons and his strong black surroundings, McKay received African traditions as well as an â€Å"appreciation for the purity of black hood† (Ali 201). Also from McKay’s agnostic brother, who tutored him, McKay gained his freethinking attitude (â€Å"Claude McKay† 1375). McKay soon gained a distrust of white people when he moved to Kingston, at the age of nineteen. In 1911, upon reaching Kingston, McKay experienced bigotry and racism unlike anything he had encountered in Sunny Ville. McKay got a job as a constable but soon grew tired of it due to his feeling that ... ...nd his people, even if he was poorly received. He did not write for monetary gains, he wrote to inspire and celebrate the grandeur of his people. His style changed black modern poetry. He is a poet, a novelist, an essayist and most of all a revolutionary. He served as the prototype of the poet for the Harlem Renaissance. Work Cited Ali, Schavi Mali. â€Å"Claude McKay.† Afro-American Writers from the Harlem Renaissance to 1940. vol. 52. Ed.:Trudier Harris. Detroit: Gale Research Inc, 1987. 201-212. â€Å"Claude McKay.† BLACK LITERATURE CRITISISM, Ed. Draper, James. Detroit: Gale Research Inc, 1992. 1375-1385. Hathaway, Heather. African American Literature. Ed.:Andrews, William. New York: Oxford University, 1997. 489-490. Martin, Tony. African Fundamentalism. Massachusetts: Majority Press, 1991. 8-9, 69-70, 84-87. Masiello, Dianne. â€Å"Claude McKay.† AFRICAN AMERICAN WRITERS. New York: Macmillan Publishing Company, 1991. 244-246. Maxwell, William. â€Å"McKay on If We Must Die." Claude McKay. 1999 http://www.english.uiuc.edu/maps/poets/m_r/mckay/mustdie.htm (10 March 2002). ---. â€Å"McKay Chronology.† Claude McKay. 1999 http://www.english.uiuc.edu/maps/poets/m_r/mckay/mustdie.htm (10 March 2002).

Biomedical research on animals Essay -- essays research papers fc

Heart attacks, bladder failure, and lack of medical cures are all very serious problems that are killing people today. How can doctors learn more about these medical difficulties? Through animal testing doctors can obtain valid results regarding these medical problems and create cures for people with many other medical difficulties. The progression of medicine and the day to day life styles of the general population rely on the ethical practice of animal testing. The alternatives to animal testing are not very valid. â€Å"Artificial testing with computer simulations, have not reached a technological level at which these simulations can be trusted to give a valid results to experiments(3).† Also, human testing has many restrictions and guidelines that make it almost impossible to perform tests on humans that could mentally or physically harm the subject. Therefore, animals provide a necessary involvement in the tests being performed today because there are no other reliable, valid sources for medical or cosmetic experimentation. Animal testing is imperative to the progression of medical cures, procedures and drugs. Animal research is constantly insuring the healthy future of others or a future at all for infants and children. â€Å"Recent advancements in biomedical research have led to better treatments for common childhood ailments(5).† â€Å"Today, vaccines developed through animal research have all but eradicated diseases such as small pox and polio and treat asthma, juvenile diabetes, childhood cancer and many other illnesses.(5)† This can be seen especially in the advancements of drugs used to cure and inhibit the HIV virus and diabetes. Today, doctors are able to â€Å"achieve long-term insulin independence in a small group of severely diabetic patients who had received pancreatic islet cell transplant, something previously achieved in experimental mice and primates but never before in humans(5).† Now people with sever even life threatening diabetes can receive relief from this dis ease. Without the necessary preliminary testing on mice, this procedure would not be possible. Think about it, a common rodent that people try to eliminate everyday is now saving peoples lives! But why animals? Are they really that biologically close to humans? Now some may argue that an animal’s anatomy is very different than that of a human’s anatomy, which is very true for the most part. H... ...ls are raised in a contained environment just like animals used for experimental research. Both food producing animals and animals used in experiments provide humans with life sustaining products. Animal testing is a way of life because it sustains and extends life and until there are valid alternatives, animal testing will remain an ethical, valid, and conclusive practice. Works Cited Animal Experimentation. 14 Jan. 2002 . Animal Research Fact vs. Myth. 14 Jan 2002 . Are There Valid Research Methods. 14 Jan. 2002 . Bad Company. 18 Jan. 2002 . Breaking the Diabetes Transplant Barrier. 14 Jan. 2002 . Fox, Michael Allen. The Case For Animal Experimentation. Los Angeles: University of California Press, 1986. End Notes (1)Animal Experimentation. 14 Jan. 2002 . (2)Animal Research Fact vs. Myth. 14 Jan 2002 . (3)Are There Valid Research Methods. 14 Jan. 2002 . (4)Bad Company. 18 Jan. 2002 . (5)Breaking the Diabetes Transplant Barrier. 14 Jan. 2002 . (6)Fox, Michael Allen. The Case For Animal Experimentation. Los Angeles: University of California Press, 1986. The Argument Over Animal Testing

Affirmative Action Cannot Erase Years of Oppression :: Argumentative Persuasive Argument Essays

Affirmative Action Cannot Erase Years of Oppression For forty years the issue of affirmative action has been subject to a tremendous amount of debate and controversy. When President Kennedy proposed the idea of preferential treatment in 1961, the nation was in the midst of radical changes regarding civil liberties. It was a time when the injustices imposed upon minorities were beginning to be recongnized, and people wanted to make up for the years of oppression that served as a barrier for the advancement of minorities in America. At the time, the idea was morally justified and socially appropriate. While it is still a morally commendable effort today, the system has become an attempt to atone for the sins of our country's past, and a double standard that threatens every citizen's liberties. The first problem with affirmative action is the obvious fact that it is an attempt to end discrimination with discrimination. When a company or university discriminates against a white male for the sake of bettering the outcome of another racial group, an injustice occurs. Affirmative action is the governmental legislation of the active discrimination of one person over another—an unacceptable and dangerous double standard. Secondly, affirmative action seeks to reconcile the injustices of the past. The horrible atrocities of the past, including slavery and the refusal to grant women and minorities the right to vote, cast an ugly shadow on the history of our nation. But affirmative action cannot erase what our ancestors did years ago. Instead of trying to reconcile the oppression of the past, we should try to lend a hand to young minorities that want to learn and be successful, but lack the resources they need to accomplish their goals. Another issue concerning affirmative action is the stigma attached to the minorities themselves. Minorities are capable of getting the best jobs, obtaining admittance to the most prestigious schools, and being as successful as any white male has ever been. The problem occurs when people view them as inferior because of affirmative action--the attitude of "You couldn't do it on your own." These implications have a lasting, damaging effect on the mental well-being of minority students. How can anybody feel truly accomplished when a lingering doubt about the legitimacy of his achievements exists? Our society must learn to embrace diversity. People from a variety of different cultures and racial backgrounds have a lot to teach one another. The only way for this to happen is to maximize diversity on

Supply and Demand and Economist View Prostitution

As we live in 21st century prostitution has been like an everyday good a market can offer. Economist view prostitution as performing a business activity. However, the problem is still around. The demand for prostitution is continually growing. What still surprises the people is that not only the homeless and starving people choose this path as a career but also young generation do as well. In some countries there are underage children that have been kidnapped or have been lost and found by people and force them into prostitution.Parents concern is that why do their children have to grow up with opinion about prostitution as a source of receiving money to survive in this world. It has turned out to be one of the most important trades in the world. Several poor countries are forced into prostitution or have no choice of other jobs turn to prostitution as a support during their economic difficulties. When a person thinks they don’t have enough education and knowledge to get a job , he or she will think of prostitution, which is easier to join the labour force. People view prostitution as a simple way to make money.Although it does leave a negative look for the society but in fact it has been recognized as popular â€Å"job† for many people, which is in fact cannot be ignored by others. People usually believe that it’s mostly woman in the prostitution market but when in reality, men are the ones that are considered to be the more important part of the high demand. Prostitution is when an individual offers to have sex and get a wage for it. When they exchange money for sexual service. Prostitution business revolves around performing sex by the opposite gender.Opportunity cost of woman choosing prostitution is marriage. In reality a woman cannot be a wife and a prostitute at the same time. By choosing that as a career they are making a rational choice by deciding that prostitution is better off for them than other jobs and also forgone marriage li fe. Even though prostitution has been increasing in popularity there is a certain restriction that needs to meet the society’s moral. Prostitutes can’t get any support from publicity and it has to be performed in a certain place.Now a day’s prostitution is considered more of a profession, just like a doctor, police office, and many others. When prostitution is considered as a profession this means they become a taxpayer like the rest of the professionals out there. Having a legal status for prostitution, the government has a benefit out this; reason being more income means more taxing paying which would go to the government at the end of the day. This makes us view prostitution as a business activity. When the service or task has been done you get cash in return, where it becomes systematic income.Even though prostitution does contribute income and high demand, but choosing prostitution as a career is irrational. According to Dr. John Lowman stated â€Å"prosti tution is considered as a potential source of renewing the budge of Canada. But there are also other reasons for not becoming a prostitute except the tax-pension side of the issue†. Another problem is the risk that is associated with being in the prostitution business. They can spread venereal diseases because they don’t do a proper medical checkup. This places the prostitution as a risk or danger occupation, and choosing a high-risk occupation is irrational.There has been a study stating that pimps play a big role in prostitution business. Pimps pay a higher rate to prostitutes compared to a prostitute that doesn’t have a pimp. It has also been noticed that if a prostitute has a pimp they would be getting paid more but would have less work at the same time. This is possible because of the most in-demand workers. These prostitutes roughly make four times compared to other work forces. Even though they get to see more money than other workers out there they still miss out some critical benefits others has that they don’t get.That is the risk associated with this job, some common known risks are STD and there are many health issues that occur in this particular job. Some might get assaulted; research has shown to be at least once a month a sex worker is assaulted on average. Which shows to be it isn’t one of the safest ways to make money. Prostitutes also face issues from police office from being arrested. By legalizing prostitution, prostitutes would be forced to drop their price. Since its legal many people would want to join that market which means more competition.This doesn’t give them another choice but to lower their prices. One of the main tools for a market is competition. If the competition is lower in the market then there is a low opportunity of the client to choose others. If she doesn’t give the client provide more for less money, he might find some other prostitute that will. Economists indicated tha t prostitution is a monopolistic market with a downward sloping demand curve. If they can sell one more unit of their good at the same price of the last one, which means they can optimize their price.Supply and demand plays a key role when it comes to prostitution because of the high volume of demand for sexual service and demand is what supplies woman pushes becomes the demand and men become the supply. Men buy by paying cash and women sell themselves for cash. Prostitution has an earning that is massive that they don’t have to turn to any other additional financing for budgeting. The reason for prostitution increase and growth in a large scale compared to previous years has to do with tourists that are seeking sexual services.As we know prostitution is that woman sell and men buy but economists stated that prostitution most likely will lose clients when men’s income increases. Needs and wants for prostitutes are men and money, but they share a competition when it com es to men. Especially to married men, they’re competing with the married men’s wives in order for them to make an earning. One advantage that wives have that gives them a step higher then prostitute is the fact they can produce children, which can only come from the father.When men’s income starts to increase they tend to have superior good by nature and they choose to buy the cheaper good. Logically to reduce prostitution, if women’s income and opportunity are great you can see less prostitution in that particular place. If that doesn’t work, increasing both men and women have an increase in income will have better results. Prostitution has been decreased in recent years. In conclusion in today’s society prostitution is no shocker. It can be found roughly every corner of the street and mainly in major cities.Many people choose to go into prostitution of money problem to support them selves or family. This is one of the professions that make enormous money with little to none budgeting required and doesn’t need any additional financing help. The profit of prostitution is really benefitting to the government, since it has been legalized the income they make some percentage is paid tax to government. Prostitution has a market behind which means more cash flow, in return more tax payable to the government. There are some down side to being a prostitution that needs to be revealed.Even though prostitution is considered to be a business and also considered as a professional, there are some key elements that are missing. First being there is no medical coverage so if they affected with any disease and need treatment or any other medical related issues, they would have to pay out of their own pocket. Second being there is no social security even though you are paying tax. If the sex workers were given the opportunity to get some education or find a decent salary they would have never considered prostitution as a job. R eference â€Å"Economics and prostitution Sample essay: free Example of Argumentative essay. Custom Essay Writing $9. 95/page | Custom-Essays. org. N. p. , n. d. Web. 12 Nov. 2012. . Europe, society. In medieval, England, and prostitutes were k†¦. â€Å"Papers — Pro Legalization of Prostitution. † Free Essays, Term Papers, Research Paper, and Book Report. N. p. , n. d. Web. 12 Nov. 2012. . Giusta, Marina Della . â€Å"Who is watching? The market for prostitution services. † SpringerLink – electronic journals, protocols and books.. N. p. , 6 Apr. 2007. Web. 2 Nov. 2012. . Economy and Prostitution. Anti Essays. Retrieved November 11, 2012, from the World Wide Web: http://www. antiessays. com/free-essays/341579. html â€Å"Page 2: Who's Counting: Sexonomics — Prostitutes' Incomes – ABC News. † ABCNews. com – Breaking News, Latest News & Top Video News – ABC News. N. p. , 7 May 2006. Web. 12 Nov. 2012. . Clark-Flory, T racy. † The economics of prostitution – Salon. com. † Salon. com. N. p. 18 Jan. 2008. Web. 12 Nov. 2012. . Frondizi, Alexandre , and Simon porcher. â€Å"Informal Urban Economy: a Historical Approach of Paris Street-level Prostitution. † Informal Urban Economy: a Historical Approach of Paris Street-level Prostitution. N. p. , n. d. Web. 12 Nov. 2012. . Clarke, D. A. â€Å"Prostitution for Everyone: feminism, globalisation, and the â€Å"sex† industry. † Prostitution for Everyone: feminism, globalisation, and the â€Å"sex† industry. N. p. , n. d. Web. 12 Nov.

Chapter 1 indians the settlements of america Essay

1. Jamestown was the first colony that gets found. It was there where the first permanent settlement occurs. Jamestown was a poor location for colonization. The men dug wells to obtain water, but the water they found could not drink because it was contaminated. In addition, the ground was wet and had too many mosquitos. The mosquitoes were carriers of diseases and made the settlers sick. After a year, about half of the settlers had died of disease and starvation. The Native American Indians kept the English alive providing them with food. The English were so busy trying to discover gold that they didn’t bother trying to grow food. That was when Captain John Smith became leader of the Jamestown colony. He saved the colony by creating a rule, which maintained that anyone who did not work would have no right to eat. This made the colonist planted food, and they were forced to build shelters and fences to protect against any attack. These American Indians or â€Å"Amerinds†, showed them great diversity of character and attainments due to the differences in climate, soil, food, building material, and the activities necessary to preserve life. They taught the settlers how to plant and grow corn, beans, squash, etc. and also helped them to establish good relations with neighboring Indian tribes. On the other hand what the English settlers offered to Native Americans Indians was different. In exchange for food, they offered them weapons, horses, cattle, sheep, vegetables and fruits, hatchets, swords, metal pots, skillets and knives, which would give them the technological advantage over their enemies. They brought not only tools for the conquest of the wilderness, but also the forms of government, the religion, the books, and the languages of the Old World. But besides the different technologies and different lifestyles that they offered to them, the English brought with them different types of diseases, such as smallpox, which was lethal to Amerinds, this produced a lethal epidemic that affected a large portion of the tribe. American Indians had a very different culture from the English people. Despite some successful interaction, questions of ownership and control of land and trust between peoples, caused conflicts arise. Virginia suffers very frequent periods of drought and by that time the colonists did not understand that the natives were ill prepared to feed them during the hard times. In the years after 1612, settlers cleared the land to prepare it for export farms dedicated tobacco, its crucial crop for economic purposes. When the tobacco exhausted farmland, the settlers continuously had to clear more areas to replace them. This small wooded land was that the Indians could use to hunt and supplement their food crops. The more settlers arrived, the more demanding land. The spread of tobacco cultivation altered life for everyone, because its cultivation required abundant land. The tribes tried to fight the invasion of the settlers. The main conflicts occurred with the indigenous slaughter of 1622 and another in 1644, both under the command of the younger brother of the late Chief Powhatan, Chief Opechancanough. Recognizing the danger, the war leader launched coordinated attacks along the James River on March 22, 1622. By the end of the day 347 colonist lay dead, and only a timely warning from two Christian converts saved Jamestown itself from destruction. Europeans had a very mixed picture of the native Indians. On one hand, they believed that the Indians could be soft and generous and also attentive and willing to trade. At first it was a very positive image and the settlers had hoped that they would be welcomed with open arms and friendly hands. They wanted to believe their way to the Garden of Eden. 2. After reading the three sources that tell the story of the Indians and the Settlement of America, I found it more accurate the description number 3 â€Å"A people and a Nation† (2008) that gives us Mary Beth Norton, because I think is a very complete description about the events that occurred with the New World. She begins by describing how other civilizations of America were. She mentions how that residents, of what is now central Mexico began to cultivate food crops, especially corn, squash, beans, avocados, and peppers; while in the Andes Mountains of South America, people began to cultivate potatoes, and it was thanks to the improvement of these techniques of agriculture that could be spread this knowledge through America with the exception of those areas with harsher climates. Thanks to agriculture most of the Americans began to adopt a more sedentary life, without the need to spend so much time hunting and gathering. I believe that it is very appropriate that she mentions these details, since it is important to us as readers have an idea of how other civilizations in the Americas were, in this manner we can understand a little more about the civilization of the Native Americans Indians, because in some way they were very similar to each other. In the same way, in this source the author also makes mention of another significant civilization of America, the Aztecs; they were one of the most important and recognized civilizations of the American continent, they had a style a little different from other civilizations, they tended to be a little more wild, they use to forced their neighbors to pay tribute in textiles, gold, foodstuffs and even in human beings, who were sacrificed to the war god Huitzilopochtli. After the author made mention of these events, she continues her story mentioning the arrival of the English for the first time in 1607 to a region near to Chesapeake Bay called Tsenacomoco. It was a group of 104 men and boys, who established the palisaded settlement called Jamestown. This source tells us the beginning of a radical change to this Nation; the author mentions the number of people, the name of the region in which they arrived, and the date on which this happened; it seems to me that these data are necessary to know for any American person, I think it is important for all of us who live in this continent know this historical fact, and more specifically know what happened in this country. I am convinced that this source is more accurate, because it shows us these and more details, and is more precise describing how was the relationship between the colonists and the Native American Indians. It shows us what was the difference between these two different civilizations, and at the same time expresses us which were their similarities. Both groups held deep religious beliefs, subsisted primarily through agriculture, accepted social and political hierarchy, and observed well-defined gender roles. Despite the coexistence that came to have each other, both groups continued to have their own beliefs and thoughts, which for me in somehow led them to start a war, because the settlers wanted to impose their will on the Indians, and at the same time the Indians wanted to not let this happen, and also they were tired of being their food source and carriers of diseases that the settlers brought.